Precisa 490 IB Series, Руководство по эксплуатации, Страница: 28 / 46

■ 9 Application
26
„PRINTER TEXT“
Unit being printed, max. 8 characters.
In the program operation, the previously defined names of the keys appear over the function keys.
After pressing a function key, the current measurement is converted in accordance with the factor assigned
and the result shown or printed out after pressing the Print key.
Thus, for example, you can convert and display the weights of sample materials of known size directly into
“gram per cubic metre”.
9.5 Paper
The setting up of the „PAPER” program is similar to that for the calculator (see chapter 9.4 "Calculator").
With the aid of this program you can convert and display the weights of paper samples of standard sizes di-
rectly in “gram per square metre”.
The standard variables 100 cm², 20x25 cm, A4 and 40x25 cm are set as defaults and are assigned to the
function keys.
9.6 Net-Total
With the aid of the „NET TOTAL“ program you can add individual weighing results, where the balance is
tared to zero again before each individual weighing procedure.
Assignment of the function keys:
Display Key Step
+ 13,4560
9
«
F
» Press until „CALCULATOR“ appears.
calculator
+ 18,166
9/m
«
A
», «
B
»
«
C
», «
D
»
The measurement is recalculated accordingly.
name1 NAME2 NAME3 NAME4
The calculated measurement is printed with the set printer text by pressing the
« PRINT »
key.
Display Key Step
+ 3,4770
9
«
F
» Hold down until „PAPER“ appears.
paper
+ 55,6390
9m2
«
A
», «
B
»
«
C
», «
D
»
The measurement is recalculated accordingly.
100 20x25 A4 40x25
The calculated measurement is printed with the set printer text by pressing the
« PRINT »
key.
• SETUP APPLICATION There is no Setup menu for this application!
NET-TOTAL
Key Function
« STO i » Take stable value and add to the sum of the components
« WAIT i » Value not stabilized yet
« RES » Reset
« INF »
Change to display the total weight („TOTAL“), residual capacity („RES. CAP.“), indi-
vidual values and again back to the normal display.
Press « esc » to exit the INF display.
Display Key Step
+ 3,4770
9
«
F
» Press until „NET-TOTAL“ appears.
net-total