Prebena 11-WP130, Инструкция по эксплуатации, Страница: 47 / 59

Page 19 of 30
a staple being
driven in. The stapler is not adequately
lubricated. Fill PREBENA special nailer oil into the used
compressed air connection.
Fire a test discharge.
The operating pressure is too
low. Increase operating pressure.
The piston with the driver
does not return to the home
position after the driving-in
action. Notify customer service.
The triggering action is not
completed. Notify customer service.
The driver is bent. Notify customer service.
The reloading
cycle is
interrupted. Passage of the throttle valves
has changed. Notify customer service.
Staple block has become
wedged during reloading. Disconnect stapler from the compressed air
supply.
Remove staples from reloading opening.
Load new staples and fire a test discharge.
Other malfunctions
If other malfunctions of the stapler have occurred which cannot be remedied by oiling and cleaning
it, you must notify the PREBENA service team.
➢
Do not carry out any repair work on the stapler.
➢
Make sure that all malfunctions of the stapler are rectified by the PREBENA service team.