Prebena 11-WP130, Инструкция по эксплуатации, Страница: 34 / 59

Page 6 of 30
Safety
When using the stapler, observe and follow all warnings and instructions in this instruction manual
and on the stapler itself.
Intended use
When using the stapler, observe and follow all warnings and instructions in this instruction manual
and on the stapler itself.
The MODULE 11-WP130 stationary stapler is used for driving staples into wooden materials,
insulating material and plasterboard. Use with other materials is only permitted after consultation
with the manufacturer. Intended use also includes compliance with accident prevention regulations
and the statutory regulations and standards applicable at the place of use. Any other use is
considered improper use and may result in material damage or even personal injury.
Improper use
In particular, improper use is considered to be if the stapler is operated
•
by persons who are not familiar with the use of staplers and the utilised materials,
•
with a bridged circuit breaker,
•
after it has been modified by the operator without authorisation,
•
using fasteners that do not originate from PREBENA, see page 24.
PREBENA WILFRIED BORNEMANN GMBH & CO. KG will not accept any liability for damage caused as
the result of improper use.
Avoiding risk of fatal injury
•
Connecting the stapler to the regulating and compressed air network is prohibited as long as
the stapler is not connected to the production system in the intended direction of
installation.
•
Never point the stapler at people, animals or their body parts.
•
Do not allow children to play with packaging film - danger of suffocation.
Avoiding risk of explosion
•
Do not use the stapler in potentially explosive environments.
•
Never operate the stapler with oxygen or with other ignitable gases or gas mixtures.
•
Do not expose the stapler to temperatures above 100 °C.
Avoiding damage to the stapler
•
Never open the stapler housing. Always leave repair work to a qualified technician.
•
Do not use the stapler if it has been dropped or damaged. Have the stapler checked by a
qualified technician before putting it back into operation.