PR electronics 9410 Series Скачать руководство пользователя | Manualshive

Страница: 20 / 61

background image

18

9410 - Product Version 9410-001

POWER CONTROL UNIT

9410

•  Distributes supply voltage to the power rail
•  Optional connection of backup supply
•  Approved for installation in Ex zone 2 / Div. 2
•  Optional redundant supply for the power rail
•  Must be installed on power rail, PR type 9400

Application and advanced features

• The power control unit detects errors from any of the modules mounted on

the power rail and transmits a collective alarm to the control system via the

internal status relay.

• Optional connection of two power supplies - a primary supply and a backup

supply.

• Redundant supply for the power rail can be obtained by mounting two 9410

modules connected to 2 separate power supplies (e.g. PR 9420).

Technical characteristics

• The status relay will be energised when the following three conditions are met:

1. Supply voltage is present on pin 31 and 32.

2. Backup supply voltage is present on pin 34 and 33. (If the backup supply

is not in use, a jumper must be placed between pins 32 and 33 -

the jumper is delivered with the module).

3. There are no error signals from the modules connected to the power

rail.

• When a collective alarm is activated via the power rail, the status relay in the

9410 will be de-energised (pins 11, 12 and 13).

• Two green front LEDs indicate connection of supply and backup.

• A red LED indicates error status.

«
...
18
19
20
21
22
...
»

Содержание 9410 Series






























































Отзывы:

Нет отзывов

Похожие инструкции для 9410 Series

Бренд: jbc Страницы: 4

Бренд: Calpeda Страницы: 4

ACTIVE DRIVER M/M 1.1

Бренд: DAB Страницы: 10

Бренд: d&b audiotechnik Страницы: 3

ACTIVE DRIVER M/M 1.1

Бренд: DAB PUMPS Страницы: 38

Бренд: Gardena Страницы: 18

VLT Micro Drive FC 51 Series

Бренд: Danfoss Страницы: 23

Бренд: rada Страницы: 16

Бренд: Jedia Страницы: 12

Бренд: JED Micro Страницы: 10

Бренд: JCM Technologies Страницы: 2

Бренд: Parker Страницы: 32

Бренд: Rayrun Страницы: 4

AeGIS 7000 Series

Бренд: PACH & COMPANY Страницы: 2

MusicCAST MCX-CA15

Бренд: Yamaha Страницы: 176

Бренд: Lab.gruppen Страницы: 2

Бренд: Blucave Страницы: 2

Бренд: Adaptec Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды