Property of
www.ppgplans.com
– Do not duplicate or make public.
Last Revised Version: January 2010
© PPGPlans.com
3)
Stand the frame up and install the radial tubes and cage hoop, make sure everything looks
straight and square. Look at it from the side and check that the hoop is straight. If it is a bit
warped looking you may need to adjust the radial tube to hoop connectors by loosening them
a bit and twisting that hoop section. Once you are satisfied you can drill the 7/32 holes
through one wall of each of the tubes being connected to hold the hoop section joints in
place above the radial tubes with the single button clips. Finally drill the ¼ inch hole all the
way through for double button clips to connect the lower hoop sections to the bottom 21
inch chromoly tube.
