manualshive.com logo in svg

PP Systems CIRAS-2, Руководство оператора

Поделиться
Скачать
PP Systems CIRAS-2 Скачать руководство пользователя страница 94

Transferring Data From CIRAS-2 to Your Computer 

 

CIRAS-2 Operator's Manual Version 2.04 

- 92 - 

2.  On your PC, start ActiveSync (

Must be ActiveSync version 3.7.1 or later

).  At this stage, it should 

show that you are not connected. With the ActiveSync window opened, go to File, Connection Settings 
and select the COM port (normally COM1) to be used on your PC.  Click Ok. 

3.  Turn the CIRAS-2 on and wait for it to get to the opening Log-in screen.  Next, exit from the CIRAS-2 

Remote Control Software by clicking on Quit. 

4.  Connect Null Modem cable between the 9 pin RS232 plug on the User Interface and the COM port on 

your PC Computer. 

5.  From the Windows CE desktop on the UI, click on Start icon on lower left hand corner of the display, 

Programs, Communication, ActiveSync. 

 
At this stage, you should have a successful connection (partnership) between the User Interface and your 
desktop  PC.    If  prompted  to  “Setup  A  New  Partnership”,  click  No  and  then  Next.    The  Microsoft 
ActiveSync  window  should  show  that  you  are  connected as a guest.  If you do not connect, perform the 
following checks: 
 

On your desktop PC 

 

Open ActiveSync and make sure that you are running version 3.7.1 or later. 

 

Click on File, Connection Settings and make sure that “Allow serial cable or infrared connection to 
this COM port” is ticked off. 

 

On the User Interface 

 

Click  on  the  Start  icon  on  the  lower  left  hand  corner  of  the  display,  Settings  and  Control  Panel.  
Next, double-

click on “PC Connection” and ensure the following: 

 

A. Make sure that “Enable direct connections to the desktop computer” is ticked off. 
B. Make sure 

that “19200@com1” is shown under “When enabled, connect to the desktop  

                  

computer using:”  If it is not, click on Change Connection… and change it to 19200@com1. 

 
 
To  transfer  stored  files  from  the  UI  to  PC,  open  Windows  Explorer  on  your  PC  and  navigate  to  Mobile 
Device\FlashFX Disk folder and identify the files to be transferred to the desktop PC.  Normally, the files 
are  stored  in  the  \FlashFX  Disk\Users\User  Name  \DataFiles  subdirectory.    Simply  copy  and  paste  the 
files to the desired folder on your desktop PC. 
 

ActiveSync® Communications Software 

 
Microsoft  ActiveSync  is  a  program  to  allow  communication  between  the  User  Interface  (or  integral  PC- 
Pencentra)  and  your  PC.    It  is  commonly  used  to  transfer  stored  CIRAS-2  data  files  from  the  UI  (or 
integral  PC-Pencentra)  to  your  PC.    Making  a  serial  connection  with ActiveSync  is  fairly  straightforward.  

This  program  must  be  loaded  on  your  PC  before  transfer  of  stored  CIRAS-2  data  files  can  take 
place. 

 
You  must visit the Microsoft website to obtain the latest version of ActiveSync.  As of the printing of this 
manual, the website address is located at: 
 

http://www.microsoft.com/windowsmobile/downloads/default.mspx

 

 

Microsoft  regularly  changes  the  layout  of  their  website,  so  it  may  be necessary to search for the current 
location. 
 

It is important to note that for proper operation, you must ensure that you are running ActiveSync 
version 3.7.1 or later. 

 

Содержание CIRAS-2








































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды