F A S T B A C K ® M O D E L 1 5 x s E K E Y O P E R A T O R ’ S M A N U A L , R E V . B — 7 / 2 4 / 0 2
5
5
II
P R O B L E M S O L V I N G
A. Symptoms & Solutions
Symptom Possible Cause Probable Solution
Machine doesn’t work • No A.C. Power • Check power cable
• Fuse blown • Replace fuse
Machine is on, but no • Program error •Turn power off, then
message appears back on
Can’t insert strip • Clamp not closed • Press BIND button
• Wrong strip width • Use correct width
strip
Book not bound, and • Strip fed with the • Notify Key Operator
no Binderstrip™ present wrong side up
• Twisted or damaged
strip
Strip not aligned with • Wrong strip length • Check if strip matches
end of pages book length. If not,
try with right
length
• Damaged strip • Try again with a new
strip
Strip extremely askew, • Damaged strip • Notify Key Operator
or only partially bound • Adhesive on binding
to book surfaces
“STRIP JAMMED” • Strip jammed in feed • Notify Key Operator
message appears bar
“DETECTION ERROR” • No valid pattern found • Insert strip with valid
message appears on inserted strip pattern
Comp Strip is • One batch of Comp • Under ‘More Options’
misidentified Strip was created menu, select option
by the machine that has the code COMP VERSION ‘A’
as SUPERSTRIP-S for SUPERSTRIP-S. and set it to ON.
(Turn it off when
you want to use
another strip type.)
NOTE:
Keep Superstrips™in their boxes until ready to use. Folded or
bent Superstrips™can cause problems in the Fastback® binder.
NOTE:
With white Composition Superstrips™, a slight yellowing may occur
during binding.
