46
Rectifier, inverter and battery temperatures (units 1ºC).
˙
Screen 2.4:
Apparent output power L1 (units 0.1kVA).
Apparent output power L2 (units 0.1kVA).
Apparent output power L3 (units 0.1kVA).
Active output power L1 (units 0.1kW).
Active output power L2 (units 0.1kW).
Active output power L3 (units 0.1kW).
Total apparent and active powers (units 0.1kVA and 0,1kW).
Output power factor of each phase for three phase equipments or
power factor for single phase equipments (units 0.01).
Output load of three phases (units 0.1%).
Total input load and total output load (units 0.1%).
Estimated backup time (units 1minute).
7.3.4.
‘‘Settings’’ level (screen menu 3.0). See Fig. 45.
Fig.45. Screen 3.0 «Settings» and its submenus.
Screen 3.1:
You can select the Theme of Main screen, choosing one of your
favourite Theme
You can program the time “hh:mm:ss” (hours/minutes/seconds) and
the date “dd/mm/yy” (day/month/year).
You can select the display language between the following options:
“English_UK”
“
简体中文
”
“
繁體中文
”
“Deutsch”
“Espanol”
“Français”
“Česky”
“English_US”
You can program the Modbus Address. The range of addresses goes
from 1 to 247.
You can program the Service Phone, Service contactor, Service mail
and Service Address
˙
Screen 3.2: In this screen you can program the BAUD RATE of
communication port #0 and port#2. The options are the following:
‘’1200’’
‘’2400’’