PowerTech MB3908, Инструкция по эксплуатации

Страница: 18 / 24

15
BLUETOOTH:
Download and setup the “MW BT Check & Charge” APP software from
Apple Store or Google Play first.
1. Connect charger to MAINS. Make sure unit is powered on. Control panel
“Power LED” lights should be on at this stage.
2. Turn on Bluetooth on desired hand held device or laptop.
3. Open “ ProUser BT Check & Charge ” Apps and press “select” language
and set desired language option.
4. Select Battery Charger Model connected to battery to be charged. There
are several model options. Input B/T password 123456 to connect
5.
Once Apps detects model being used to charge battery, it will show
process status
6. If there exists any problem with the connection of the charger to the
battery, (reverse polarity), or if the battery is beyond recovery, (dead
battery), an ERROR message will appear to indicate situation.
7. After ERROR message has been dealt with and there is no issue preventing
the charging process, the monitor will show the active process.
8. Choose “6V Mode” “Motorcycle” or “Car Mode”.
9. You may also choose “Cold” mode for cold environment or “Recover”
mode for depleted battery.
10. You may opt to input ON/OFF command to stop charging or to proceed
with charging process.
0V battery charging.
This feature is used for zero volt batteries; it uses a very small pulse current
to sense the connection of the battery. This function is used in lithium
batteries, as lithium battery pack has Protection Circuit Modules (PCM),the
battery pack output is 0V when the PCM have actioned.
Overheating protection
If the appliance becomes too hot during charging, the power output is
automatically reduced. This protects the appliance from damage.
Trickle charging
Once the battery has been fully charged, the charger automatically changes
to trickle charging. Depending on the measured voltage, the charging is
interrupted or the battery is maintained in a fully charged condition with low
voltage currents (1.3A or 0.9A / 0.08A).
NOTE: a battery can remain permanently connected to the charger without
damage or adverse effect on its performance. The trickle charge can be used
to maintain a battery.
SPECIAL FUNCTIONS: