PowerTech MB3908, Инструкция по эксплуатации

Страница: 10 / 24

7
PRODUCT FEATURES:
This appliance has been designed for charging a variety of SLA batteries
(sealed lead acid batteries), as mainly used in cars, motorbikes and several
other vehicles. They may be of types e.g. WET (with liquid electrolyte), GEL
(with mit gel-type electrolyte) or AGM (absorbed glass mat) batteries. A
special design of the appliance (also named „ten-phase-charging strategy“)
enables the recharging of the battery to almost 100 % of its original capacity.
Connecting the battery for a long period to the battery charger is also a
good way of ensuring that your battery is kept in optimum condition. The
“ten-phase-charging strategy” as follows:
Step 1: Check
Checks the battery voltage to make sure battery connections are good and
the battery is in a stable condition before beginning the charge process.
Step 2: Recovery
Initializes the Recovery process, if needed, for deeply discharged or sulfated
(desulfation) batteries by pulsing small amounts of current.
Step 3: Soft Start
Slow charge and protect for deeply discharged or sulfated (desulfation)
batteries by multi -phase of current.
Step 4-7: Bulk
The Bulk charging process continues using both a High Rate and Medium
Rate charge and returns 80% of battery capacity, Indicated by the 20%, 40%,
60%, 80% and 100% LCD.
Step 8: Absorption
Brings the charge level to 80%, The battery charger will deliver small
amounts of current to provide a safe, efficient charge and limit battery
gassing.