Horsepower (Peak HP).................................................. 0.5
Voltage...........................................................................120
Amp................................................................................5.5
Hertz................................................................................60
Phase.........................................................................Single
RPM.............................................................................3450
Belt size...................................................................4" x 36"
Belt speed...........................................................1850 FPM
Disc diameter....................................................................8”
Disc speed..........................................................3000 RPM
Table dimensions..........................................6-1/2" x 8-3/4"
Table tilts...............................................................0° to 45°
Dust port diameter......................................................2-1/2"
Base dimensions...................................................10" x 17"
TABLE OF CONTENTS
PRODUCTION
SPECIFICATIONS
SAFETY RULES
1
Work Preparation
Work Area Preparation
Tool Maintenance
Tool Operation
ASSEMBLY
2
Unpackaging
Tools Needed
Mount Sander
Attach Abrasive Disc
Attach the Table Assembly to Use with Sanding Disc
Attach the Table Assembly to Use with Sanding Belt
Attach Dust Collection Bag
Power Source
Grounding Instructions
Extension Cords
Motor
Electrical Connections
OPERATION
6
ON/OFF Switch
Adjust Belt Tracking Mechanism
Adjust Belt Assembly Position
Adjust Table Tilt Angle
Belt Sanding in Horizontal Position
Operate Sanding Belt
Operate Sanding Disc
Set Up the Miter Gauge
Replace Sanding Belt
Replace Sanding Disc Abrasive
MAINTENANCE
9
General Maintenance
Cleaning
Lubrication
Keep Tool in Repair
TROUBLESHOOTING
10
PARTS ILLUSTRATION & 11
LIST
WARRANTY
14
SECTION
PAGE
