PowerShield Centurion PSCER10000, Руководство пользователя

Страница: 16 / 27

www.powershield.com.au
15
ON
On
OFF
Off
FBD
Not allowed
OPN
Allow
RES
Reserved
3-6. LCD Setting
There are three parameters to set up the UPS. Refer to following diagram.
Parameter 1: It’s for program alternatives.
There are 15 programs to set up. Refer to below
table.
Parameter 2 and parameter 3 are the setting
options or values for each program.
15 programs available list for parameter 1:
Code Description Bypass AC ECO CVCF Battery
Battery
Test
01 Output voltage Y
02 Output frequency Y
03 Voltage range for bypass Y
04 Frequency range for bypass Y
05 ECO mode enable/disable Y
06 Voltage range for ECO mode Y
07 ECO mode frequency range setting Y
08 Bypass mode setting Y Y
09 Battery backup time setting Y Y Y Y Y Y
10 Programmable output setting
11 Shutdown point for programmable output
These functions are not supported by the Rack model
12 Reserved for future setting N/A
13 Battery voltage adjustment Y Y Y Y Y Y
14 Charger voltage adjustment Y Y Y Y Y Y
15 Output voltage adjustment Y Y Y
*Y means that this program can be set in this mode.
Parameter 1
Parameter 2 Parameter 3