PowerShield Centurion 10000 VA, Руководство пользователя

Страница: 29 / 36

www.powershield.com.au 28
Bypass mode Description When input voltage is within acceptable range and bypass is enabled, turn
off the UPS and it will enter Bypass mode. Alarm beeps every two minutes.
LCD display
Battery Test Description When UPS is in AC mode or CVCF mode, press “Test” key for more than 0.5s.
Then the UPS will beep once and start “Battery Test”. The line between I/P
and inverter icons will blink to remind users. This operation is used to check
the battery status.
LCD display
Warning
status Description If some errors occur in the UPS (but it is still running normally), it will show
one more screen to represent the warning situation. In the warning screen,
the icon
will be flashing, and it can show up to 3 error codes and each
code indicates one error. You can find the code meaning in the warning
code table.