Powermatic PJ-882, Инструкция по эксплуатации и каталог запасных частей

Страница: 7 / 48

7
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a Model PJ-882 Jointer. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed
and constructed to provide years of trouble free operation if used in accordance with instructions set forth
in this manual. If there are any questions or comments, please contact either your local supplier or WMH
Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Description
The Model PJ-882 Jointer is built upon a parallelogram design. This design allows independent
adjustment of sections of the infeed and outfeed tables to ensure the tables remain parallel with the
cutterhead and with each other. The fence has a tilting capacity of 45 degrees forward and backward,
with positive stops.
Specifications
(1 Phase Model) (3 Phase Model)
Model Number ................................................................. PJ-882...................................................PJ-882
Stock Number................................................................1610079................................................ 1610080
Maximum Cutting Width (in.) ..................................................... 8............................................................ 8
Maximum Cutting Depth (in.).................................................. 1/2......................................................... 1/2
Rabbeting Capacity (in.)......................................................... 1/2......................................................... 1/2
Cutterhead Speed (RPM)....................................................7,000..................................................... 7,000
Motor ...................................................... TEFC, 2HP, 1Ph, 230V................... TEFC, 3HP, 3Ph, 230/460V
(prewired 230V)
Starter .......................................................................... magnetic................................................magnetic
Number of Knives ..................................................................... 3............................................................ 3
Cuts Per Minute................................................................21,000................................................... 21,000
Cutterhead Diameter (in.).................................................. 3-1/16.................................................... 3-1/16
Table Surface (L x W)(in.) .................................................. 83 x 8.................................................... 83 x 8
Fence Size (L x H)(in.) ................................................. 38 x 4-3/4.............................................. 38 x 4-3/4
Fence Tilt (deg.).................................... 45 forward, 45 backward........................ 45 forward, 45 backward
Positive Stops (deg.).................................................-45, 90, +45........................................... -45, 90, +45
Dust Chute Diameter (in.) ......................................................... 4............................................................ 4
Overall Dimensions (L x W x H)(in.) ......................... 84 x 28 x 44...........................................84 x 28 x 44
Net Weight – approx. (lbs.).................................................... 610........................................................ 610
Shipping Weight – approx. (lbs.) ........................................... 744........................................................ 744
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.