TetherBox Installation
c.
The Carabiner Hook is snapped onto the Mounting Hook. This limits the table’s
movement.
d.
Connect the main wires (from the power supply) to the DC connectors in the
TetherBox body. This provides DC power to the DC coil cord.
e.
Connect (crimp) the female DC connector to the table daisy chain
f.
Connect the DC Coil Cord to the under table daisy chain. This provides DC power
to the Charging Spots.
g.
Mount the joint DC connectors to the table using the clamp.
h.
Close the TetherBox Cover.
Figure 24: TetherBox location, as close as possible to the surface
Figure 25: DC connectors mounted to a table using a clamp