PowerMaster RSG 2000, Руководство по установке

Страница: 1 / 13

1
Powermaster Model RSG 2000
INSTALLATION MANUAL
CAREFULLY READ THIS ENTIRE MANUAL FIRST BEFORE PROCEEDING!
LEAVE THIS MANUAL WITH END USER FOR FUTURE REFERENCE AFTER INSTALLATION IS COMPLETE
(LAST PAGE SHOULD BE FILLED OUT AND RETAINED BY INSTALLER FOR FUTURE USE)
THE FOLLOWING INFORMATION SHOULD BE RECORDED AT TIME OF INSTALLATION:
Date: ____________ Serial #:__________________________ Wiring Diagram #:___________________
THE OPERATOR SERIAL # IS LOCATED ON THE REAR INTERIOR WALL OF THE OPERATOR
ENCLOSURE. THE WIRING DIAGRAM IS LOCATED IN THE LEFT INTERIOR WALL OF THE
OPERATOR ENCLOSURE WITH THE DIAGRAM # AT THE LOWER RIGHT- HAND CORNER OF
PAGE.
THE ABOVE INFORMATION SHOULD BE GIVEN IN ALL CORRESPONDENCE REGARDING
THE OPERATOR TO INSURE FAST SERVICE WHEN ORDERING PARTS OR REQUESTING
INFORMATION.
The above identified unit is rated in the following class:
[ X ] Class I- Residential Vehicular Gate Operator -A vehicular gate operator (or system) intended for use
in a home of one to four single family dwellings, or a garage or parking area associated therewith.
[ X ] Class II- Commercial/General Access Vehicular Gate Operator -A vehicular gate operator (or system)
intended for use in a commercial location or building such as a multifamily housing unit (five or more
single family units), hotel, garages, retail store or other building servicing the general public.
[ X ] Class III- industrial/limited Access Vehicular Gate Operator -A vehicular gate operator (or system)
intended for use in an industrial location or building such as a factory or loading dock area or other
locations not intended to service the general public.
[ X ] Class IV Restricted Access Vehicular Gate Operator -A vehicular gate operator (or system) intended
for use in a guarded industrial location or building such as an airport area or other restricted access locations
not servicing the general public, in which unauthorized access is prevented via supervision by security
personnel.
Attach large warning signs provided to each side of gate in the most conspicuous place. Mount control
station and smaller warning placard together within sight of the gate opening.
Attach large warning signs
provided to each side of gate in
the most conspicuous place.
Mount control station and smaller
warning placard together within
sight of the gate opening.