PowerLite 1705c, Руководство пользователя

Страница: 90 / 198

90
Presenting Through a Wireless Network
2. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the
LAN
port on the projector.
3. Point the remote control at the projector and press the
P
Power
button.
4. Press the
EasyMP
button on the remote control to select EasyMP
as the source.
5. Press the
Menu
button on the remote control, select the
Network
menu, then press
Enter
.
6. Choose
To Network Configuration
and press
Enter
.
7. Choose
Wired LAN
and press
Enter
.
You see the following screen:
8. Do one of the following:
■ If your network assigns addresses automatically, turn on the
DHCP
setting.
■ If your network does not assign addresses automatically, turn
off
DHCP
and enter the projector’s
IP Address
,
Subnet
Mask
,
Gateway Address
, and
DNS Servers
, as needed.
note
Only the Epson Ethernet
unit is guaranteed to work.
Other brands may not be
compatible.
If you see a message asking
you to insert a LAN or
memory card, check to make
sure your Ethernet unit is
properly inserted.
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.