Enterprise
VAC4 and VAC4S Hardware User’s Guide
085-00000700 Rev K
Page 3 of 100
About this Guide
This Guide provides detailed information on the proper use and maintenance of PowerFleet
Enterprise vehicle management system (VMS), including the 4th generation Vehicle Asset
Communicator® (VAC), other vehicle peripheral hardware, and the Wireless Asset Manager (WAM).
Safety
The PowerFleet VMS is not intended for use as a primary safety device. Installation must NOT
adversely affect any vehicle safety system or safety device. The installation, configuration and
operational procedures provided in this Guide are intended for use ONLY by personnel certified on
PowerFleet VMS installation. It is the user’s responsibility to ensure that the procedures in this Guide
are completed by certified personnel ONLY, using the proper tools and following the proper safety
protocols. The procedures and recommendations in this Guide do not supersede any Federal, State
or Local regulations.
Confidentiality Notice
© 2020 PowerFleet, Inc. All rights reserved. This document contains confidential and/or proprietary
information and may be reproduced for the user’s inte
rnal training purposes ONLY. This document
may not be reproduced in part, or shown, or in any way disclosed to any third party, without the
express written consent of PowerFleet, Inc.
Disclaimer
The information contained in this Guide is subject to change without notice and should not be
construed as a specification.
Disclaimer and Limitation of Liability
PowerFleet, Inc. assumes no responsibility for any damage or loss resulting from the use of its
products or services. PowerFleet assumes no responsibility for any loss or claims by third parties,
which may arise through using its products or services.