PowerDot PD-01V, Инструкция по эксплуатации

Страница: 36 / 46

36
All Bluetooth commands sent from the mobile device to
PowerDot are securely encrypted through Bluetooth built-in
Secure Simple Pairing mechanism.
PowerDot Mobile Application and PowerDot PD-01
Bluetooth communication interface are specifically designed
to accommodate temporary and permanent Bluetooth
disconnections during a stimulation session.
PowerDot PD-01 device is capable of independent execution of
a pre-loaded stimulation program with the latest intensity values
as well as implement automatic Bluetooth® reconnections.
In this regard, temporary radio frequency interference
(e.g. caused by co-existence of multiple Bluetooth and/or Wi-Fi
devices in your range) will not affect the overall efficiency and
safety of your stimulation.
Due to hardware-level emergency stop mechanisms (see
Directions For Use ), Bluetooth disconnections of a more
permanent nature should not affect the safety of stimulation,
and can only cause a temporary inconvenience by forcing you
to postpone your planned stimulation session until a more
favorable Bluetooth connectivity environment is established.
Like any Bluetooth Low Energy-powered device, PowerDot PD-01
emits very low levels in the radio frequency (RF) interval, and
is therefore not likely to cause any interference with nearby
electronic equipment (e.g., radios, computers, telephones etc.).
PowerDot PD-01 is designed to withstand foreseeable
disturbances originating from electrostatic discharges, mains
supply magnetic fields, or radio frequency transmitters.
Despite this, it is not possible to guarantee that the stimulator
will not be affected by strong RF (radio frequency) fields
emitting from other sources.