Height Adjustment
The height adjustment is set to 3 mm at the
factory. If streaks are produced, despite an
optimum angle adjustment, the clearance
between the casters and floor must be
adjusted by changing the number of
washers on the holder.
In cases of very smooth floors, e.g. finished
floors, PVC, linoleum, etc. Number of
washers = 2. This corresponds to a
clearance of approx. 2 mm.
In cases of very uneven floors, e.g. poorly
laid tiles (water does not run off) Number of
washers = 4. This corresponds to a
clearance of approx. 4 mm.
The Squeegee 110 cm (7569) is
equipped with two additional rollers which
are adjusted at the factory to a distance of
10 mm to the floor by means of spacers.
Fig.14
