free (Fig. 4/9)
Silence Kit tip symbol (optional)
(Fig. 4/10)
This symbol appears when Silence Kit tip-
switch is switched on.
Solution flow symbol (Fig. 4/11)
This symbol appears upon actuation of the
solution flow tip-switch.
Silence Kit tip-switch (optional) (Fig.
4/12)
This tip-switch is used to change vacuum
motor to silent mode. The silent mode
symbol appears in the display.
Solution flow tip-switch (Fig. 4/13)
This tip-switch is used to regulate the
amount of solution. Additionally, solution
amount is adapted to driving speed. The
display shows a six-stage symbol for the
supplied amount of solution.
Solution supply ON/OFF tip-switch (Fig.
4/14)
This tip-switch is used to switch solution
supply ON or OFF.
Scrubbing tool symbol (optional) (Fig.
4/15)
This symbol appears when scrubbing tool-
switch (A) is switched on
Hand cleaning tool (optional)
Hand-cleaning tool with spray function for
the E 24 with scrubbing tool connection for
thorough cleaning on areas which are
difficult to reach.
Drive direction control with speed
control knob/bail handle (Fig. 4/16)
The drive direction control (16a) is used to
control the driving direction (forward or
reverse). The bail handle (16c) must be
pressed in order to drive. The speed can be
adjusted continuously by means of the
speed control knob (16b). The machine
stops when the bail handle is released
(deadman function).
Protect the machine against
rolling off before leaving it un-
attended.
