Comply with regulations imposed by
law when disposing of detergents.
Before commencing any work on the
electrical system, always disconnect
battery connector. Every day, before
first operation, the
Admiral 40
should
be inspected for operational
safety.
The
Admiral 40
must
be inspected
for safe condition by an authorized
expert as required, not less than
once a year. Results of such inspec-
tion
must
be kept on file at least until
next inspection is performed.
Note:
prior to performing maintenance
work, as described below, a function
check of all controls should be done, in
order to determine serviceability of the
machine.
Service display
The
Admiral 40
is equipped with
a service display. If an error is detec-
ted, e.g. a fuse is blown, a 4-digit num-
ber will appear in the display (hour-
meter), 4 dots start blinking and a
buzzer sounds. This numerical display
contains valuable information for the
service engineer about the last error
found. This feature will make it an easy
job to repair a defect. The following
table describes some possible error
codes which you may repair yourself.
41
Notes on warranty
The terms of the sales contact apply.
Damages are not subject to warranty if
they are due to non-compliance with
the maintenance and service pro-
visions. Any maintenance work has to
be performed by an authorized
PowerBoss
service work
shop and confirmed in
the „maintenance certificate“ which is
the warranty document.
The following is excluded from
warranty:
natural wear and tear after overload,
fuses and damages caused by
inexpent handling and unauthorized
modification of the machine. Moreover,
any claim for warranty becomes extinct
if damages at the machine are caused
by fitting of parts or accessories
without
PowerBoss's
prior and explicit
consent.
Comply with regulations imposed by
law when disposing of detergents.
Before commencing any work on the
electrical system, always disconnect
battery connector. Every day, before
first operation, the Hakomatic 1100
has to be inspected for operational sa-
fety.
The Hakomatic 1100 has to be inspec-
ted for safe condition by an authorized
expert as required, but not less than
once a year. Results of such inspec-
tion have to be kept on file at least until
next inspection is performed.
Note:
prior to performing maintenance
work, as described below, a function
check of all controls should be done, in
order to determine serviceability of the
machine.
Service display
The Hakomatic 1100 is equipped with
a service display. If an error is detec-
ted, e.g. a fuse is blown, a 4-digit num-
ber will appear in the display (hour-
meter), 4 dots start blinking and a
buzzer sounds. This numerical display
contains valuable information for the
service engineer about the last error
found. This feature will make it an easy
job to repair a defect. The following
table describes some possible error
codes which you may repair yourself.
89
Notes on warranty
The terms of the sales contact apply.
Damages are not subject to warranty if
they are due to non-compliance with
the maintenance and service pro-
visions. Any maintenance work has to
be performed by an authorized Hako
service work-shop and confirmed in
the „maintenance certificate“ which is
the warranty document.
The following is excluded from
warranty:
natural wear and tear after overload,
fuses and damages caused by
inexpent handling and unauthorized
modification of the machine. Moreover,
any claim for warranty becomes extinct
if damages at the machine are caused
by fitting of parts or accessories
without Hako’s prior and explicit
consent or by noncompliance with the
maintenance instructions.
