PowerBoss Admiral 40, Руководство пользователя

Страница: 14 / 54

Control panel B (righthand)
15* key for filter
shaker
in vacuum sweeping
attachment)
16* key for
vacuum motors
in vacuum
sweeping attachment
17* key for vacuum sweeping attachment
(optional)
18* key for side scrubber (optional)
19 key switch
20 horn button
21* key for decreasing detergent dosage
22* key for detergent dosing attachment
(optional)
23** key for increasing detergent dosage
24** key for dirty water purification system
(optional)
25* switch for searchlight (optional)
26* switch rotating beacon (optional)
* these keys are inop unless the
respective option is installed.
** When actuating, "OP" will appear
in the hourmeter display, in case
the option isn't existing.
15 Key for filter shaker
to
shake
the filter system (filter panels);
dust falls into the vacuum sweeping
attachment. When activating, 3
interval
shaking
cycles (for 6 approx.
seconds) will be started. This action
may be discontinued by turning the
key switch ON/OFF (RESET) or by
depressing the #15 key once again.
16 Key for vacuum motors
to turn the
vacuum motors
for the
sweeping attachment's filter plant
ON/OFF.
17 Key for vacuum sweeping
attachment
to turn the sweeping attachment
ON/OFF
14
Control panel B (righthand)
15* key for filter jolter in vacuum sweeping
attachment)
16* key for suction turbine in vacuum
sweeping attachment
17* key for vacuum sweeping attachment
(optional)
18* key for side scrubber (optional)
19 key switch
20 horn button
21* key for decreasing detergent dosage
22* key for detergent dosing attachment
(optional)
23** key for increasing detergent dosage
24** key for dirty water purification system
(optional)
25* switch for searchlight (optional)
26* switch rotating beacon (optional)
* these keys are inop unless the
respective option is installed.
** When actuating, "OP" will appear
in the hourmeter display, in case
the option isn't existing.
15 Key for filter jolter
to jolt the filter system (filter panels);
dust falls into the vacuum sweeping
attachment. When activating, 3
interval jolting cycles (for 6 approx.
seconds) will be started. This action
may be discontinued by turning the
key switch ON/OFF (RESET) or by
depressing the #15 key once again.
16 Key for suction turbine
to turn the suction turbine for the
sweeping attachment's filter plant
ON/OFF.
17 Key for vacuum sweeping
attachment
to turn the sweeping attachment
ON/OFF
62