Vacuum sweeping attachment
(optional)
Collects garbage in the dry area in
front of the scrubber. Both side brus-
hes sweep the
debris
into the sweep-
ing
brush's path
. Fine dust is collected
by a
vacuum motor
and held back by
a filter. Nothing but clean air will leave
the machine. The
Admiral 4
0
with
the
vacuum sweeping attachment installed
complies with CAT U (BIA), vacuum
sweeper and filter are easily accessi-
ble for maintenance.
Scrubber
High cleaning power by disc-type
brushes; no tools necessary for repla-
cing brushes. Depending on
type
of
floor and soilage, brush load is adju-
sted electrically. Brush lift automa-
tically interrupts water supply and
rotation of brushes.
An optional side scrubber is available
for working close to walls. This side
scrubber is located on the right side of
the machine and is retractable.
Extra-large squeegee
in pendulum-type suspension
High suction power removes dirty wa-
ter even from uneven floor and during
turning. Floor is left dry and ready to
step on. Automatic lift
for reverse
travel.
First Operation
First operation of the
Admiral 4
0
should be performed by a
represenitive
of
your local
PowerBoss
distributor.
Right
away after shipping of the macine,
the
local distributor is advised and will get
in touch with you to make a date for
training
.
Battery charge
condition monitor
The
Admiral 4
0
is equipped with
a charge condition monitor to preclude
poor battery charge conditions. That
charge condition monitor is part of the
electronic system and adjusted by the
factory as required for PzS batteries
(Displayed number: 5).
If different batteries are used, the low
voltage sender will have to be set for
such batteries.
Note:
The low voltage sender should
be set
by
a
PowerBoss
service center only.
6
Battery / charger
Tray-type battery, 36 V/640 Ah5, PzS:
Low-maintenance drive battery in steel
tray, includes water refill system and
cable harness.
Battery charger
36 Volts /
36
Amps:
characteristic IUIa.
Power supply
120
VAC.
Installation / removal
of tray-type battery
Battery installs as follows:
●
open left and right doors
●
swing seat structure forward
●
introduce tray-type battery with a
hoist or forklift from the left,
as shown.
Vacuum sweeping attachment
(optional)
Collects garbage in the dry area in
front of the scrubber. Both side brus-
hes sweep the garbage into the sweep-
ing roller's track. Fine dust is collected
by a suction turbine and held back by
a filter. Nothing but clean air will leave
the machine. The Hakomatic 1100 with
vacuum sweeping attachment installed
complies with CAT U (BIA), vacuum
sweeper and filter are easily accessi-
ble for maintenance.
Scrubber
High cleaning power by disc-type
brushes; no tools necessary for repla-
cing brushes. Depending on sort of
floor and soilage, brush load is adju-
sted electrically. Brush lift-out automa-
tically interrupts water supply and
rotation of brushes.
An optional side scrubber is available
for working close to walls. This side
scrubber is located on the right side of
the machine and is retractable.
Extra-large squeegee
in pendulum-type suspension
High suction power removes dirty wa-
ter even from uneven floor and during
turning. Floor is left dry and ready to
step on. Automatic lift-out for reverse
travel.
First Operation
First operation of the Hakomatic 1100
should be performed by an engineer of
your local Hako distributor only. Right
away after shipping of the macine, the
local distributor is advised and will get
in touch with you to make a date for
training lessons.
Battery charge
condition monitor
The Hakomatic 1100 is equipped with
a charge condition monitor to preclude
poor battery charge conditions. That
charge condition monitor is part of the
electronic system and adjusted by the
factory as required for PzS batteries
(Displayed number: 5).
If different batteries are used, the low
voltage sender will have to be set for
such batteries.
Note:
The low voltage sender should
be set in a Hako service center only.
54
Battery / charger
Tray-type battery, 36 V/640 Ah5, PzS:
Low-maintenance drive battery in steel
tray, includes water refill system and
cable harness.
Battery charger
36 Volts / 80 Amps:
characteristic IUIa. Power supply
400 VAC.
Installation / removal
of tray-type battery
Battery installs as follows:
●
open left and right doors
●
swing seat structure forward
●
introduce tray-type battery with a
hoist gear or forklift from the left,
as shown.
