background image

Operator Safety

Equipment Description

Read this manual carefully and become familiar
with your pressure washer. Know its applications,
its limitations, and any hazards involved.

This pressure washer operates at 2,600 PSI (179.2 BARS) at
a flow rate of 2.3 gallons (8.7 l) per minute. This high quality
residential system features 10” (25.4 cm) wheels, axial cam
pump with stainless steel pistons, automatic cool down
system, detergent siphoning system, nozzle extension with
quick connect fitting and tip holder, a variety of spray tips,
heavy duty 25’ (7.6 m) hose, and more.

Every effort has been made to ensure that information in this
manual is accurate and current. However, we reserve the
right to change, alter, or otherwise improve the product and
this document at any time without prior notice.

The Emission Control System for this pressure washer is
warranted for standards set by the Environmental Protection
Agency and the California Air Resources Board.

Important Safety Information

Safety Symbols and Meanings

The safety alert symbol indicates a potential personal

injury hazard. A signal word (DANGER, WARNING, or
CAUTION) is used with the alert symbol to designate a
degree or level of hazard seriousness. A safety symbol may
be used to represent the type of hazard. The signal word

NOTICE

is used to address practices not related to personal

injury. 

DANGER

indicates a hazard which, if not avoided, 

will

result in death or serious injury.

WARNING

indicates a hazard which, if not avoided,

could

result in death or serious injury.

CAUTION 

indicates a hazard which, if not avoided, 

could

result in minor or moderate injury.

NOTICE

address practices not related to personal injury.

4

www.powerboss-equipment.com

WARNING   

The engine exhaust from this product

contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.

WARNING   

This product contains lead and lead

compounds, known to the State of California to cause
birth defects or other reproductive harm.  

Wash your

hands after handling this product.

Fire

Explosion

Toxic Fumes

Hot Surface

Moving Parts

Electrical Shock

Slippery Surface

Fall

Kickback

Flying Objects

Fluid Injection

Operator’s Manual

Chemical Burn

Not 

for  

Reproduction

Содержание 2.600













































Отзывы: