3
English
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS
AND OPERATING INSTRUCTIONS BEFORE USING THIS
EQUIPMENT. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
personal injury.
WaRnInG:
RISK OF ELECTRIC SHOCK, Do
not use with an extension cord near water or where water
may accumulate. Keep work light at least 16 feet from
pools and spas. Keep plugs and receptacles dry. Use only
three-wire outdoor extension cords with grounded plugs
and grounded receptacles.
•
Ground Fault Circuit Interrupter (GFCI) protection
should be provided
on the circuit(s) or outlet(s) to be
used for this light in wet locations. Receptacles are
available having the built-in GFCI protection and are
able to be used for this measure of safety.
•
Use only with an extension cord for outdoor use,
such as an extension cord of cord type: SW, SW-A, SOW,
SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A,
SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
•
Do not look directly at the lighted lamps to avoid
eye injuries.
•
Always keep the work light away from any
flammable surface or materials.
•
Always check damaged or worn-out parts before
using the work light.
Broken parts will affect the work
light operation. Replace or repair damaged or worn
parts immediately. If repairs are needed, consult a
professional electrician.
•
Do not use a pressure washer to clean this product.
•
Do not modify the work light in any way.
Unauthorized
modification may impair the function and/or safety and
could affect the life of the product. There are specific
applications for which the work light was designed.
•
Store work light in a secure place out of the reach of
children.
Inspect it for good working condition prior to
storage and before re-use.
California ProPosition 65 Warning
This product can expose you to Lead and other chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Wash your hands after
handling. For more information go to www.P65Warnings.
ca.gov
ASSEMBLY INSTRUCTIONS
attacHInG tHe Hook (FIG 2)
Attach the metal hook (1) to the bracket (2) using the bolt,
washers and nut, as shown in FIG 2.
IMPORTANT SAFETY INSTRUCTIONS
caUtIon:
•
Keep the metal parts of light away from any live power
source.
•
Prior to installation and maintenance of the light,
disconnect the light from power source to prevent
electric shock.
•
Installing and operating the light in harsh environments
may shorten the lifespan and/or damage the light.
•
Keep the light away from any corrosive substance and
only clean with dry cloth and non-abrasive cleaner.
•
To ensure personal safety, make sure the light is
mounted firmly and securely when installed in a high
position.
tURnInG tHe LIGHt on/oFF
Your work light is equipped with an ON/OFF switch (8-FIG 1)
on the back side of the work light. Press the switch once to
turn the work light on and press the switch a second time to
turn it off. Always turn the work light off before unplugging.
MAINTENANCE
WaRnInG:
Always make sure the work light
is unplugged and completely cool before attempting to
clean it.
Your work light requires very little care and maintenance.
Simply clean the lens regularly with a non-abrasive cleaner.
Use the similar care for the stand.
This product is warranted free from defects in material and
workmanship for
5 (Five)
years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to
returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
For questions about this or any other
PowerSmith
™
product,
Please call Toll-Free:
888-552-8665.
Or visit our website:
www.
powersmithproducts.com
OPERATION
WARRANTY
HELP LINE
