Maintenance
WARNING: THE MACHINE
CONTAINS NO USER-SERVICEABLE
PARTS. PLEASE CONTACT AN
AUTHORISED POWER PLATE
®
SERVICE PROFESSIONAL
FOR ANY MAINTENANCE OR
TROUBLESHOOTING NOT
OTHERWISE DESCRIBED BELOW,
OR PERSONAL INJURY OR DAMAGE
TO THE MACHINE COULD RESULT.
CAUTION: Any changes, modifications,
or unauthorised maintenance performed
to or on the machine could void the
product warranty.
Always unplug the machine and let stand
for at least one minute before performing
any maintenance.
Clean the machine only with a moist cloth.
Do not use sharp objects, bristles, scrubs,
or acid-based detergents, because this
will damage the lacquer finish.
Do not spray any cleaning solution directly
onto the machine. Instead, moisten a cloth,
then apply to the machine.
On plastic components, use only polishes
specifically designed for plastic.
Use a soft brush, not a cloth, to clean the
platform, including the contoured mat.
Clean electrical components only with
a dry cloth, in order to avoid the risk of
shock or damage to the components.
Troubleshooting
Always unplug the machine and let stand
for at least one minute before performing
any troubleshooting.
If the machine is not operational and the
console display is not illuminated, check
the power connections to the machine.
If all power connections are proper,
please check the circuit breaker or fuse
for the electrical outlet that is supplying
power to the machine in order to ensure
that the outlet is receiving electrical
power.
If the console display is illuminated, but
the platform will not vibrate, unplug the
machine, wait at least one minute, then
check the connection to the machine’s
motor, located under the base of
the machine.
If the machine makes a rattling noise,
unplug the machine, wait at least one
minute, then check to make sure that
the feet are properly tightened.
DANGER: Power Plate strongly
recommends that the user not try to
resolve any electrical issues regarding the
power source to the machine by oneself.
Instead, power plate strongly recommends
that the user contact a licensed,
professional electrician to conduct any
examination and make any necessary
repairs. Otherwise, serious personal injury
or property damage
could result.
APPLIED PARTS:
applied parts are not in-
tended to deliver heat during normal use.
The maximum temperature for applied
part may be up to 43degrees Celsius /
109.4 degree Fahrenheit.
Applied Parts:
•
Platform
•
Handlebars
Power On / Off
:
•
To Power On the Machine: Press
the rocker switch located on lower
back of the column to indicate “I”
position.
•
To Power Off the Machine: Press
the rocker switch located on lower
back of the column to indicate “0”
position.
Accessories
Pro5M Accessories
•
Straps Set (2pcs)
•
Exercise Mat
•
Protection Cover
•
Power Cord
•
Poster
•
Power shield (option)
!
!
•
•
•
•
•
•
•
•
•
!
En
gl
ish
19
