Page 50 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
5.5.
LCD Display
5.5.1
Connection of system to the grid
The two-line Liquid Crystal Display is located on the front panel and shows:
Inverter operating status and statistics;
Service messages for operator;
Error messages and fault indications.
During regular operation, the display will cycle through available data. The display
changes to a different screen every 5 seconds, or screens may be scrolled manually
by pressing the UP (2nd key from display) and DOWN keys (3rd key from
display).
1) These two screens are displayed upon inverter start-up:
2) The following screens may appear while waiting for the connection to be
established:
-
While the system checks for grid connection to be established (“Missing Grid”),
the yellow LED next to the display turns on steady, while the green LED is
flashing.
-
When waiting for sun radiation (“Waiting Sun”), the green LED turns on steady.
-
When the “Missing Grid” and “Waiting Sun” conditions are verified, the inverter
is connected.
3) Time (seconds) to complete output voltage and frequency check.
POWER-ONE
Initialing…
Please waiting
Missing Grid
Waiting Sun
Next connections:
2
secs
Содержание AURORA PVI-6000-OUTD-AU Series
