Power One AURORA PVI-6000-OUTD-AU Series, Инструкция по установке и эксплуатации

Страница: 48 / 89

Page 48 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
Message Warning Error
type
Description
Grid Fail W003 // Grid Fail
Wrong grid parameters
Int.Error // E010 Bulk Low
Int.Error // E011 Ramp Fail
DC/DC Fail // E012 DcDc Error revealed by inverter
DcDc fault detected by inverter
Wrong Mode // E013 Wrong Input setting (Single instead of dual)
Wrong input setting (single instead of dual
channel)
Over Temp. // E014 Overtemperature
Internal temperature too high
Cap. Fault // E015 Bulk Capacitor Fail
Bulk capacitor fault
Inv. Fail // E016 Inverter fail revealed by DcDc
Inverter fault detected by DcDc
Int.Error // E017 Start Timeout
Ground F. // E018 I leak fai
Leakage current fault l
Int.Error // E019 Ileak Sensor fail
Leakage current fault
Int.Error // E020 DcDc relay fail
DcDc relay fault
Int.Error // E021 Inverter relay fail
Inverter relay fault
Int.Error // E022 Autotest Timeout
Int.Error // E023 Dc-Injection Error
Grid OV W004 // Output Overvoltage
Grid UV W005 // Output Undervoltage
Grid OF W006 // Output Overfrequency
Grid UF W007 // Output Underfrequency
Z Grid HI W008 // Z grid out of range
Impedance outside range
Int.Error // E024 Unknown Error
–
Internal Error
--------- // E025 Riso Low (Log Only)
Low insulation resistance (Log only)
Int.Error // E026 Vref Error
Wrong reference voltage (VRef)
Int.Error // E027 Vgrid Measures Fault
Grid voltage (VGrid) misreading
Int.Error // E028 Fgrid Measures Fault
Grid frequency (FGrid) misreading
Int.Error // E029 Zgrid Measures Fault
Grid impedance (ZGrid) misreading