Page 5 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
GENERAL
During inverter operation, some parts can be powered, some not properly insulated
and, in some cases, some parts can move or rotate, or some surfaces be hot.
Unauthorized removal of the necessary protections, improper use, wrong
installation or wrong operation may lead to serious damage to people and objects.
Transport, handling, installation, commissioning and maintenance must be
performed by qualified and trained personnel (all accident prevention rules in force
in the user's country must be observed ! !!).
According to these basic safety rules, qualified and trained people have skills for
the assembling, start-up and operation of the product, as well as the necessary
requirements and qualifications to perform such operations.
ASSEMBLY
Devices shall be assembled and cooled according to the specifications mentioned
in the corresponding documents.
In particular, during transport and handling, parts shall not be bent and/or the
insulation distances shall not be changed. There should be no contact between
electronic parts and connection terminals.
Electrical parts must not be mechanically damaged or destroyed (potential health
risk).
ELECTRICAL CONNECTION
With the inverter powered, comply with all prevailing national regulations on
accidents prevention.
Electrical connections shall be carried out in accordance with the applicable
regulations, such as conductor sections, fuses, PE connection.
Содержание AURORA PVI-6000-OUTD-AU Series
