Power-Flo Pumps & Systems • 877-24PUMPS • www.powerflopumps.com
3
DISCHARGE
2” NPT, Female, Vertical
LIQUID
TEMPERATURE
200°F (93°C) Continuous High Temperature
SOLIDS HANDLING
1/2” Solids through strainer.
2” without strainer
VOLUTE
Cast Iron, Class 30
MOTOR HOUSING
Cast Iron, Class 30, w/removable upper
chamber for ease of capacitor and cord
replacement
IMPELLER
2 Vane, open with pump out vanes on back side
Material: Cast Iron, Class 30
SHAFT
Stainless Steel
SEAL PLATE
Cast Iron, Class 30
SQUARE RINGS
Buna-N
HARDWARE
Stainless Steel
PAINT
Powder Coated - Industrial Grade
SEAL
Inboard Single Mechanical, Oil Filled ,
Material: Type 21, Silicon Carbide/Buna-N
Secondary Exclusion Seal
POWER CORD
15 Ft. Cord, Plug on 115 Volt, Pressure
Grommet for Sealing and Strain Relief
MOTOR
Oil Filled, Squirrel Cage Induction
Class H Insulation, Vacuum Pressure
Impregnated (VPI)
SINGLE PHASE
Permanent Split Capacitor (PSC),
Includes Overload Protection in Motor:
115v, 50A, Trip Off Temp. 293°F (145°C),
Closing Temp. 226°F (108°C)
UPPER BEARING
Single Row, Ball, Oil Lubricated
LOWER BEARING
Single Row, Ball, Oil Lubricated
SLUDGE STRAINER
Bar Strainer with 3” extended feet
LEVEL CONTROL
Wide Angel, High Temperature Mechanical
Float. 15Ft. cord with piggy-back plug.
Normally Open (N/O)
Specifications - High Temp
MODEL
HP Hz Volts/
Ph
RPM Full Load
Amps
Locked
Rotor Amps
NEMA Start
Code
Winding Resistance
MAIN -- START
Cord
Type
Cord
Size
Cord
O.D.
PFS411HTCE-2 4/10 60 115/1 1750
10.0
24.5
N
1.6 -- 18.5
SJOOW
16/3 0.325
Series: PFS411HTCE-2
4/10 HP • 1750 RPM • 60 Hz
High Temperature
Submersible Sewage Pump
PFS411HTCE-2
Submersible Effluent, Sump & Sewage Pumps
