8990863
16 Gauge Straight Finishing Air Nailer
V1.0
8
For technical questions call 1-800-665-8685
8. Inspect work piece.
a. If fastener is driven too deep or too shallow into work
piece, adjust the air accordingly before continuing.
b. If results are as desired, continue.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically, including the trigger,
safety mechanisms and spring. Repair or replace damaged or
worn components. Only use identical replacement parts
when servicing.
3. Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or
replaced by an authorized technician. Only use identical
replacement parts when servicing.
4. Follow instructions for lubricating and changing accessories.
5. Only use accessories intended for use with this tool.
6. Keep the tool handles clean, dry and free from oil/grease
at all times.
7.
Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
8. Check and change all worn or damaged O-rings and seals.
9. Tighten all screws and caps.
10. Keep magazine and nose of tool clean and free from any dirt, lint
or any other abrasive materials.
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user and/or others.
