V1.0
16 Gauge Straight Finishing Air Nailer
8990863
Visit www.princessauto.com for more information
7
UNPACKING
WARNING! Do not operate the tool if any part is
missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories
from the packaging and inspect for
damage.
IDENTIFICATION KEY
A
Handle
B
Gun Body
C
Trigger
D
Magazine
E
Air Inlet
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List.
Letter references in parenthesis (A) refer to the included
Identification Key.
OPERATION
1.
Disconnect the tool’s air supply from the air inlet (E).
2.
Keeping the point of the tool facing downwards, insert a strip of
fasteners into the magazine (D).
3.
Release the latch (#64) and pusher (#77) and then slide the
pusher against the magazine.
4.
Reconnect the tool to the air supply.
5.
Ensure the air pressure is within the correct range
(see Specifications).
6.
Holding the handle (A) firmly, press the tool onto your work
piece in the desired location and hold steady.
7.
Gently squeeze the trigger (B) to drive fastener into work piece.
