8972283
3.6V Cordless Scissors
V4.0
8
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
BATTERY RECHARGING
1. Press the battery clips inward and pull the battery from the housing.
2. Align the battery contacts with the charger base contacts and press the
battery into the base. It will fit without resistance. Press until it snaps into
place.
3. Plug the charger into the charger base port, then into a wall outlet.
4. Unplug the charger when recharging is completed.
5. Press the battery clips inward and pull the battery from the charger and
install it into the tool.
CLEANING
1. Remove the battery pack when cleaning the tool.
2. Clean the housing with a damp cloth and mild detergent only. Avoid the
battery contacts.
3. Brush dust and debris away from the tool’s ventilation holes.
4. Carefully clean the blades with a damp cloth, then a dry cloth. Be careful
not to cut yourself on the blade’s edge.
