Power Fist 8957425, Руководство пользователя

Страница: 11 / 36

V4.0 120V 1,000 BPM Demolition Hammer Kit 8957425
Visit www.princessauto.com for more information 11
short as practicable.
SWITCH OPERATION
WARNING! Observe correct mains voltage. The
voltage of the power source must agree with the
voltage specified on the type plate of the power
tool.
• Switch on: press the switch towards (1)
direction
• Switch off: release the switch towards (2)
direction
For low temperatures, the machine reaches the full impact rate only after a
certain time.
This start-up time can be shortened by striking the chisel in the machine against
the floor one time.
AFTER EACH USE
WARNING!
• Do not remove the chisel until it has cooled.
•
Store the hammer in a dry and clean place.
• Keep the hammer away from children.
MAINTENANCE
WARNING!
•
Do not use solvents to clean the hammer.
• Carbon brushes are consumable parts. When they become worn, they can
cause problems with the motor. Use an auto-stop carbon brush, which will
stop automatically when the carbon brush is worn, then replace the
brushes.
• If the power supply cord of this power tool is damaged, it must be replaced
and only by a qualified service technician.