Power Fist 8911323, Руководство пользователя

Страница: 9 / 28

V
1.0 8911323
Visit www.princessauto.com for more information 9
LUBRICATION
Inspect and lubricate the tool when required. Only use a light oil. Periodically
lubricate all moving parts. Do not allow oil onto the heel blocks or frame of the
shop press.
STORAGE
When not in use, store the press in a dry location with ram and piston fully
retracted.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
DISPOSAL OF HYDRAULIC FLUID
Do not drain hydraulic oil into the sewer system or dispose in an uncontrolled
location. Hydraulic fluid may take more than a year to breakdown in the
environment and the ingredients may still be toxic. Contact your local
municipality for proper disposal instructions or locations.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s) Possible Cause(s) Suggested Solution(s)
No oil flow 1. Cylinder doesn’t
move.
2. Air lock in the lines
3. No pressure reading
on gauge.
1. Check oil level. Fill as required.
2. Loosen fitting to bleed line.
3. Check pressure gauge. Replace if
defective.
a.
Check control valve. Clean, repair
or replace as required. Check
cylinder seals. Oil bypassing in
cylinder. Replace seals.