Power Fist 8911323, Руководство пользователя

Страница: 10 / 28

8911323 20 Ton Hydraulic Shop Press V1.0
10 For technical questions call 1-800-665-8685
Problem(s) Possible Cause(s) Suggested Solution(s)
Oil on Press. 1. Oil leaking from
cylinder.
2. Oil leaking from loose
fitting or line.
1. Replace seals as required.
2. Tighten or add sealant as required.
a.
Defective fitting. Replace.
Cylinder ram
doesn’t move. 1. Hydraulic problems.
2. Press overloaded.
3. Ram jammed.
4. Ram binding.
5. Press efficiency
drops.
1. Check hydraulic system. Check
workpiece.
2. Exceeded capacity of Press. Use a
larger press.
3. Check cylinder. Remove defective
part and repair.
4. Cylinder ram is bent. Replace ram
and seals. Use more care when
applying loads.
5. Purge air from hydraulic system as
described in Bleeding the Hydraulic
System.