Power Fist 8843518, Руководство пользователя

Страница: 8 / 36

8843518 Air Reciprocating Saw V1.0
8 For technical questions call 1-800-665-8685
6. Support large panels to minimize the risk of blade pinching and kickback.
Large panels tend to sag under their own weight. Supports must be placed
under the panel on both sides, near the line of cut and near the edge of
the panel.
7. To minimize the risk of blade pinching and kickback, when cutting
operation requires the resting of the tool on the workpiece, the tool
should be rested on the larger portion and the smaller piece cut off.
8. Use extra caution when making a ‘plunge cut’ into existing walls or other
blind areas. The protruding blade may cut objects that can cause kickback.
9. Only use blades designed for the tool. Do not use dull or damaged blades.
Unsharpened or improperly set blades produce narrow cuts causing
excessive friction, blade binding and kickback. Keep blades sharp and
clean. Gum and wood pitch hardened on blades slows the saw and
increases potential for kickback.
10. Never force the saw. Forcing the tool can cause uneven cuts, loss of accuracy,
and possible kickback. Push the tool forward at a speed so that the blade cuts
without slowing.
VIBRATION PRECAUTIONS
1. This tool vibrates during use. Repeated or long-term exposure to vibration
may cause temporary or permanent physical injury. Take frequent breaks
when using the tool.
2. If you feel any medical symptoms related to vibrations (such as tingling,
numbness, and white or blue fingers), seek medical attention as soon as
possible.
3. Wear suitable gloves to reduce the effects of vibration.
4. DO NOT use this tool before consulting a physician if one of the following
applies:
a. Pregnant
b. Impaired blood circulation to the
hands
c. Past hand injuries
d. Nervous system disorders
e. Diabetes
f. Raynaud's Disease
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.