Power Fist 8843518, Руководство пользователя

Страница: 12 / 36

8843518 Air Reciprocating Saw V1.0
12 For technical questions call 1-800-665-8685
optimum performance from your new air tool. Use two drops of air tool oil to
lubricate the tool and run the tool under no load until exhaust is clear.
7. In the event that it becomes necessary to store the tool for an extended
period of time (overnight, weekend, etc.), it should receive a generous
amount of lubrication at that time. The tool should be run for
approximately 30 seconds to ensure oil has been evenly distributed
throughout the tool. The tool should be stored in a clean and dry
environment.
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil may
act as a solvent that can break down the grease and cause the tool to seize up.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s) Possible Cause(s) Suggested Solution(s)
Tool runs at normal
speed, but loses
power under load. Motor parts worn. 1. Have a qualified technician
service the tool.
2. Replace tool or parts.
Tool runs slowly.
Air flows slightly
from exhaust. Motor parts jammed with
dirt particles.
OR
Airflow blocked by dirt. 1. Check air inlet filter for
blockage.
2. Pour air tool lubricating oil
into air inlet as per
lubrication instructions for
clearing shipping grease.
3. Operate tool in short bursts
to clear debris.
4. If tool still jammed, clean tool
and lubricate per lubrication
instructions.