Power Fist 8843518, Руководство пользователя

Страница: 5 / 36

V1.0 Air Reciprocating Saw 8843518
Visit www.princessauto.com for more information 5
2. Accessories must be rated for at least the recommended strokes per
minute speed of the tool (see Specifications)
3. Keep hands away from cutting area and the blade. Keep both hands
securely on the saw.
4. Keep your body positioned to either side of the blade, but not in line with
the saw blade. Kickback could cause the saw to jump backwards.
5. Do not reach underneath the work piece while operating the saw.
6. Never hold a work piece being cut in your hands or across your leg. Secure
the work piece to a stable platform. It is important to support the work
properly to minimize body exposure, blade binding, or loss of control.
7. Stay clear of end pieces that may fall after cutting. They may be hot, sharp
and/or heavy. Serious personal injury may result.
8. Always handle the saw blade with care when mounting or removing it.
9. Do not start the tool when the blade is touching the work piece.
10. Hold the tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own
cord. Contact with a ‘live’ wire will also make exposed metal parts of the
power tool ‘live’ and shock the operator.
11. Always use blades that are designed to be used with this saw. Blades that
do not match the mounting hardware of the saw may be launched with
great force from the saw causing damage to property or personal injury. A
blade that does not match the mounting hardware may also run
eccentrically, causing loss of control.
12. After changing a blade or making adjustments, make sure that the blade
chuck is holding the blade securely.
13. Do not use dull or damaged blades.
14. Do not use the tool on any material containing asbestos.
15. Avoid cutting nails. Inspect the work piece for any nails and remove
before cutting.
16. Do not touch the blade or the surface that has been cut with this tool
immediately after use. The surface will be hot and may cause an injury.
AIR TOOL PRECAUTIONS
1. Use only clean and dry compressed air as a power source. Contaminated
or moist air will gradually damage the tool.