8664385
1.6 GPM @ 1,950 PSI Gas Pressure Washer
V 4.0
8
For technical questions call 1-800-665-8685
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
•
Pressure Washer •
Gun Wand
•
25 ft PVC hose
•
3 Nozzles (Soap, 0°, 25°)
ASSEMBLY & INSTALLATION
Your pressure washer requires some assembly. The pressure washer will also
requires fuel before it is ready for use.
BEFORE THE FIRST USE
The engine will require fuel before using the pressure washer for the first time.
Consult the included Engine Manual’s Care & Maintenance section for instructions
on how to add fuel to the engine.
ATTACHING HIGH PRESSURE HOSE TO SPRAY GUN
1. Pull back the quick connect collar at the end of the high pressure hose and
connect to the quick connect fitting on the spray gun. Pull the high pressure
hose and the spray gun in opposite directions to ensure they do not separate.
2. Connect the spray wand to the spray gun by threading it into place. Secure
hand tight.
3. Connect the water source.
a. Before connecting a garden hose to pump inlet, inspect the inlet screen.
Clean the screen if it contains debris or replace it if damaged. DO NOT
run pressure washer if inlet screen is damaged.
b. Run water through your garden hose for 30 seconds to clean out any debris.
IMPORTANT! DO NOT siphon standing water for the water supply.
Use only clean, cold water (less than 100 °F).
