Double Flaring Tool Kit
8
For technical questions call: 1-800-665-8685
2990245
V 2.0
9. Loosen the flaring press and remove it from the tubing vise. Loosen the two wing nuts on the vise and
remove the finished tubing. The single male flare is complete (Fig.5).
DOUBLE FLARE
The double flare uses both the male and female methods to create a tubing flare. Follow steps 1-8 for a single male
flare and include the next steps
:
9. Loosen the flaring press, but do not remove it.
10. Remove the flaring die.
11. Place the cone of the flaring press into the flared end of the tube and retighten the flaring press. This will
force the bell shaped flare back into the top of the tube to complete the double flare (Fig 6).
12. Continue to tighten the flaring press until the end of the tube is flared correctly (Fig. 7).
Double Flare
Die
Swivel head on
flaring press
Single male
flare
13. Loosen the flaring press and remove it from the tubing vise. Loosen the two wing nuts on the vise and
remove the finished tubing.
MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will prevent
unnecessary problems.
2. Keep the tool handles clean, dry and free from oil/grease at all times.
3. Follow instructions for lubricating and changing accessories.
4. Inspect the tool fittings periodically. Have damaged or worn components repaired or replaced by an
authorized technician.
5. Maintain the tool’s label and name plate. These carry important information. If unreadable or missing,
contact Princess Auto Ltd. for replacements.
CAUTION! Only qualified service personnel should repair the tool.
LUBRICATION
Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants may not be suitable
and may damage the tool or cause a malfunction during use.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust. Remove the
lubricant before using the tool again.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
Fig. 7
Fig. 6
