Double Flaring Tool Kit
5
For technical questions call: 1-800-665-8685
2990245
V 2.0
UNPACKING
1. Carefully remove the parts and accessories from the box. Retain packaging material until you have carefully
inspected and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and accessories were not damaged while shipping.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to
do so could result in a malfunction and serious personal injury.
PARTS IDENTIFICATION
Contents:
1. Flaring press
2. Deburring tool
3. Flaring dies
a. 3/16 in. Flaring die
b. 1/4 in. Flaring die
c. 5/16 in. Flaring die
d. 3/8 in. Flaring die
e. 7/16 in. Flaring die
f. 1/2 in. Flaring die
g. 5/8 in. Flaring die
4. Adjustable mini tube cutter
5. Tubing vise with 7 clamping positions
OPERATION
PREPARE THE TUBING
Cut the tubing squarely with the adjustable tube cutter. The flaring press cannot create a proper flare if the tube cut
is out-of-true.
1. Adjust the tube cutter by turning the large knob until the tube is gripped between the cutting wheel and the
two guide wheels.
2. Turn the cutter around the tube to create a groove with the cutting wheel. During the first few rotations check
that the cutting wheel does not leave the groove. Tighten the cutter as the groove deepens. Continue until the
tube is cut into two pieces.
3. Use the deburring tool and clean any burrs from the end of the tube.
