1/2 in. Air Ratchet and Socket Set
7
Visit www.princessauto.com for more information
8395881
V 2.5
UNPACKING
1. Carefully remove the parts and accessories from the box. Retain packaging material until you have carefully
inspected and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and accessories were not damaged while shipping.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to
do so could result in a malfunction and serious personal injury.
PARTS IDENTIFICATION
Contents:
• Air Ratchet
• 7 chrome vanadium impact sockets: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 and 13/16 in.
• 3 in. extension bar
• 3 screwdriver bits
• 3 in. adaptor 1/4 in. (f) x 1/2 in. dr
• Universal joint
• Air tool oil
• 1/4 in. NPT connector
OPERATION
1. Select the socket appropriate for the task at hand. Only use sockets that are specifically designed for use
with an air ratchet wrench.
2. Connect the tool to the air hose.
3. Place the socket over the fastener and squeeze the trigger to operate the tool
CAUTION! Do not use any additional force upon the ratchet in order to remove a nut.
CAUTION! Do not allow the ratchet to run without load for an extended period of time, as this will shorten
its life.
MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will prevent
unnecessary problems.
2. Keep the tool handles clean, dry and free from oil/grease at all times.
3. Follow instructions for lubricating and changing accessories.
4. Inspect the tool components periodically. Have damaged or worn components repaired or replaced by an
authorized technician.
CAUTION! Only qualified service personnel should repair the tool.
