Power Electronics SD750 Series, Руководство по аксессуарам, Страница: 34 / 42

SD750 POWER ELECTRONICS
32
COMMISSIONING
Subgroup G23.3: Communications
Subgroup G23.3 allows visualizing the status of communication between the COIN and the SD750.
•
Warning 49: Communication COIN
– SD750
•
Fault 109: Communication COIN
– SD750
Screen Range Function
Set on
RUN
G23.3.4
EthernetIP board
state = Off
Off
On
Shows the status of the Ethernet/IP board.
OPT. FUNCTION
Off The board is not connected.
On The board is connected
NO
G23.3.5 EthernetIP
board test = No No
Yes
Enables the LED fast blinking. This is useful to locate the board in case several boards of the
same type are connected.
Note: This parameter will only appear if an Ethernet/IP board has been connected.
NO
G23.3.6 EthernetIP
Com Error = Fault
Off
Warning
Fault
Allows defining the behavior of the drive in case communication with the Ethernet/IP board is
lost.
OPT. FUNCTION
Off Drive will remain operating normally.
Warning Warning “W49:EthernetIP” expansion will be triggered.
Fault Fault “F109:Exp EthernetIP comm” will be triggered and the drive will stop.
NO