Power Electronics SD750 Series, Руководство по аксессуарам, Страница: 30 / 42

SD750 POWER ELECTRONICS
28
COMMISSIONING
Subgroup 21.1: Ethernet
Sub-group G21 of the SD750 drive allows you to configure and display the status of the Ethernet IP
board
Screen Range Function
Set on
RUN
G21.1.1 Automatic IP
= No
No
Yes
Allows assigning the parameters automatically.
OPT. FUNCTION
No
Drive will take the IP, subnet mask and gateway addresses set by the user in
[G21.1.2, G21.1.3 and G21.1.4].
Yes
The drive requests and receives the parameters of the IP, Subnet Mask and
Gateway addresses from the Network Server. DHCP protocol is used.
YES
G21.1.1.1 Assigned
IP = 0.0.0.0
0 to 255
Shows the drive IP address, regardless of whether it was assigned automatically or by the user in
parameter [G21.1.2].
YES
G21.1.1.2 Assigned
subnet = 0.0.0.0
0 to 255
Shows the drive subnet mask, regardless of whether it was assigned automatically or by the user
in parameter [G21.1.3].
YES
G21.1.1.3 Assigned
gateway = 0.0.0.0
0 to 255
Shows the drive gateway address, regardless of whether it was assigned automatically or by the
user in parameter [G21.1.4].
Format of Gateway Address is: A.B.C.D. YES
G21.1.2 IP address =
192.168.1.143
0 to 255
Sets the IP address of the equipment in the user local network. This address must be provided
by the local network administrator.
Format of the IP address is: A.B.C.D.
To configure the address, enter a value in each of the four parameters that compose it.
NO
G21.1.3 Subnet Mask
= 255.255.255.0
0 to 255
Sets the subnet mask address of the equipment in the user local network. This address must be
provided by the local network administrator.
Format of the subnet mask is: A.B.C.D.
To configure the address, enter a value in each of the four parameters that compose it.
NO
G21.1.4 Gateway =
0.0.0.0
0 to 255
Sets the gateway address of the equipment in the user local network. This address must be
provided by the local network administrator.
Format of the gateway address is: A.B.C.D.
To configure the address, enter a value in each of the four parameters that compose it.
NO
G21.1.5 MAC
address= A.B.C.D.E.F
0x00 to 0xFF
Sets the MAC address. This address must be unique and exclusive and depends on the LAN
board. This address must be provided by Power Electronics.
Format of the MAC address is: A.B.C.D.E. F.
To configure the address, enter a value in each of the six parameters that compose it.
NO