Power Electronics SD300146, Руководство по аппаратному обеспечению и установке, Страница: 28 / 65

SD300 SERIES
POWER ELECTRONICS
26
RECEPTION, HANDLING AND TRANSPORTATION
5. RECEPTION, HANDLING AND
TRANSPORTATION
CAUTION
Read carefully the following instructions to ensure correct mechanical installation.
Otherwise, the equipment can be damaged and lead to personal injuries.
Reception and Storage
The SD300 is carefully tested and perfectly packed before delivery. In the event of transport damage,
please ensure that you notify the transport agency and Power Electronics: 902 40 20 70 (Interna34
96 136 65 57) or your nearest agent, within 24hrs from receipt of the goods.
Make sure model and serial number of the drive are the same on the delivery note and unit.
Drive should be stored in a sun and moisture protected space and with an ambient temperature between
-20°C and +65°C, < 95 RH without condensation. It is recommended not stacking more than two units.
Handling and Transportation
CAUTION
Handle the equipment carefully.
Otherwise, the equipment can gete damaged.
SD300 is delivered horizontally in a cardboard box.
Unpack the drive carefully. Do not use sharp tools as they could damage the product. After opening the
package, please check the contained goods. Verify the item numbers contained within the package with
the packing inventory list. Please remove and set aside any spare parts shipped with the product. There
should be no evident damage caused by vibration, dropping or moisture.
Figure 5.1 Drive unpacking.
When unpacking, carefully extract the drive from the box. The drive is packed with its frontal side facing
up. Remove and place in its vertical standing position.