Power Electronics SD300146, Руководство по аппаратному обеспечению и установке, Страница: 17 / 65

POWER ELECTRONICS
SD300 SERIES
CONFIGURATION TABLE & STANDARD RATINGS
15
Standard ratings
–
400VAC
IP20
Power ND (kW) Power HD (kW) Current ND (A) Current HD (A)
EMC STANDARD EMC EXTENDED
Model Frame Model Frame
0.75 0.4 2.0 1.3 SD300242 1N SD300242F [2]
1F
1.5 0.75 3.1 2.4 SD300342 2N SD300342F
[2]
2.2 1.5 5.1 4.0 SD300542 3N SD300542F
[2]
2F
4 2.2 6.9 5.5 SD300742 4N SD300742F [2]
5.5 4 10 9.0 SD301042 5N SD301042F [2] 3F
7.5 5.5 16 12
-
SD301642F
[2]
4
11 7.5 23 16 SD302342F
[2]
15 11 30 24 SD303042F [2]
5
18.5 15 38 30 SD303842F [2]
22 18.5 44 39 SD304442F
[2]
6
30 22 58 45 SD305842F
[2]
[2] EMC class 3.
IP66
Power HD (kW) Current HD (A)
EMC STANDARD EMC EXTENDED
Frame
Model Model
0.4 1.3 SD300146 SD300146F [2]
1I
0.75 2.4 SD300246 SD300246F [2]
1.5 4.0 SD300446 SD300446F [2]
2I 2.2 5.5 SD300646 SD300646F
[2]
4 9.0 SD300946 SD300946F [2]
5.5 12 SD301246 SD301246F [2]
3I
7.5 16 SD301646 SD301646F [2]
11 24 SD302446 SD302446F
[2]
4I
15 30 SD303046 SD303046F [2]
18.5 39 SD303946 SD303946F [2]
5I
22 45 SD304546 SD304546F [2]
[2] EMC class 3.

Maximum applicable capacity is indicated in the case of using a 4-pole standard motor (200 and 400V
classes are based on 220 and 440V, respectively).

For the rated capacity, 200 and 400V class input capacities are based on 220 and 440V, respectively.
 The rated output current is limited depending on the setup of carrier frequency [G4.4].

The output voltage becomes 20~40% lower during no-load operations to protect the drive from the
impact of the motor closing and opening (0.4~4.0kW models only).

Dual rating is supported except IP66/NEMA 4X.