Power Electronics NB CITY, Руководство по аппаратному обеспечению и установке

Страница: 22 / 48

NB City POWER ELECTRONICS
20
HANDLING AND TRANSPORTATION
HANDLING AND TRANSPORTATION
CAUTION
Please read the following transport and installation instructions carefully.
Failure to follow the transport and installation instructions could result in damage to the equipment or
injury to persons.
Reception
The equipment is delivered perfectly packed and checked. Upon receipt, inspect the equipment. In the
event of damage to the equipment, notify the forwarding agent and Power Electronics 902 40 20 70,
(Interna34 96 136 65 57), or your nearest agent, within 24 hours of receipt. Verify that the goods
received correspond to the delivery note, models and serial numbers.
Storage
The equipment should be stored in a location that avoids direct sunlight, with an ambient temperature
between -40°C and +60°C and relative humidity of <90% without condensation.
Whenever possible, the equipment should be unloaded at its place of installation and operation and
stored in its original packaging.
If it is necessary to store the equipment, the following rules should be followed to keep it in proper
condition until the time of installation:
•
Equipment should be stored in a protected location that avoids excess moisture (inside and outside
the equipment) and direct sunlight.
•
Store the equipment on a flat, level surface.
•
Keep the covers on during storage.
•
Store the unit away from chemicals or corrosive gases.
•
Keep the equipment packed until the time of installation.
Unpackaging
To unpack, carefully remove the packaging (do not use sharp tools). After removing the packaging, check
the material inside. If you receive replacement material with the product, please separate it and store it
in a safe place. It must not be exposed to vibrations, drops or moisture.
4