Power Electronics NB CITY, Руководство по аппаратному обеспечению и установке

Страница: 8 / 48

NB City POWER ELECTRONICS
6
SAFETY SYMBOLS
SAFETY SYMBOLS
Always follow safety instructions to prevent accidents and potential hazards from occurring.
In this manual, safety messages are classified as follows:
Other symbols used in this manual for safety messages are the following:
NOTICE
Meaning of acronyms, which are used in this document:
•
EV: Electrical vehicle
•
AC: Alternating current
•
DC: Direct current
•
PPE: Personal Protection Equipment
•
RFID: Radiofrequency identification
•
MCB: Miniature circuit breaker
•
RCD: Residual current device
•
RCM: Residual current monitor
•
MID: Measuring instrument directive
•
CCID: Charge circuit interrupting device
WARNING
Identifies potentially hazardous situations where dangerous voltage may be
present, which if not avoided, could result in minor personal injury, serious
injury or death.
Be extremely careful and follow the instructions to avoid the risk of electrical
shocks.
CAUTION
Identifies potentially hazardous situations, which if not avoided, could result
in product damage, or minor or moderate personal injury.
Read the message and follow the instructions carefully.
NOTICE
Identifies important measures to take in order to prevent damage equipment
and warranty lost, as well as encouraging good use and environmental
practices.
Hot surface. Be careful and follow the instructions to avoid burns and personal injuries.
Risk of fire. Be careful and follow the instructions to prevent causing an unintentional fire.
Caution, risk of electric shock. Energy storage timed discharge. Wait for the indicated
time to avoid electrical hazards.